Inspect & prepare
Confirm substrate stability, surface condition and moisture. Clean, repair and level the intended surface before the trial.
Explain where it goes, and how it is built.
For architecture: mark façade elevation, orientation and floor. For mobility: mark cabin, port/starboard side or vehicle trim part. For technology: identify the panel, housing, interface layer and process stage. Provide a marked drawing or photo with dimensions in the enquiry email.
Know what you are specifying.
Open a term for its meaning. The enquiry choices below describe your project requirements; they do not imply that every finish meets every requirement.
Substrate
The base receiving the finish: for example MDF, HDF, steel, aluminium or an existing laminate. Its condition affects adhesion and appearance.
MDF / HDF / particleboard
Engineered wood boards. MDF is medium-density fibreboard; HDF is high-density fibreboard. Particleboard contains bonded wood particles. Porous faces and edges need an appropriate preparation system.
PP / PET / OPP
PP means polypropylene. PET means polyethylene terephthalate. OPP means oriented polypropylene. These identify polymer families, not automatic proof of a particular performance.
CMF
Colour, Material and Finish: the combined design specification for visual appearance, texture and gloss.
TLF / thermal lamination
Thermal Laminate Film: a film interface bonded through an industrial heat-and-pressure process. Confirm the grade, temperature window and equipment.
Bonding interface
The adhesive, primer or thermal-lamination layer that joins the decorative surface to its base. Compatibility must be established for both materials.
Peel adhesion / edge lift
Peel adhesion is resistance to separation under a defined test. Edge lift is separation starting at an edge. Test conditions and ageing must accompany the result.
UV / weathering / colour change
UV is ultraviolet radiation. Weathering testing evaluates changes under stated light, heat and moisture exposure. Test duration alone does not establish real-world service life.
VOC / emissions
Volatile organic compounds and other emitted substances. A report must identify the tested construction, method and conditions; film results do not automatically cover the underlying board.
Fire performance
The reaction of a specified material or assembly to fire under a defined test. Specify the required method and assembly; decorative sheets are not universally fireproof.
Abrasion / chemical resistance
Abrasion concerns wear from repeated contact. Chemical resistance concerns defined cleaners or substances at stated concentrations and exposure times.
MOQ / batch / grain direction
MOQ is minimum order quantity. Batch identifies a production lot. Grain direction is the orientation of a wood or linear pattern; align it with the panel layout.
Mock-up / pilot panel
A representative trial installation or manufactured panel used to approve appearance, bonding, seams and edge details before larger-scale work.
Exterior / marine / automotive qualification
Application-specific review of exposure and required tests. Architectural interiors, yacht interiors, vehicle interiors and exterior wraps require separate suitability decisions.
A disciplined specification.
Confirm the bonding method
Select the appropriate primer or industrial lamination route for the grade and substrate. Follow the approved product instructions.
Approve a mock-up
Review colour, texture, edge detail, adhesion and grain direction on a representative panel. Plan consistent production batches.
Install & maintain
The supplied decorative-sheet guide gives an application ambient range of 10–38°C. Confirm the final grade-specific conditions and cleaning method before work starts.